We plan camera position, lens and mounting according to the detail that needs to be seen on site. We assess outdoor, PTZ, panoramic and thermal camera options according to light, distance and environmental conditions.
Before counting cameras, determine what you need to see at each point
The site layer is the eye of the system and the most expensive layer to fix later: moving a camera already up a pole means pulling the cable again. Here, each camera’s position, lens, sensor, light and weather conditions and image goal (detection, observation, recognition, identification) are determined. Mounting, cabling and commissioning are closed out with documentation.
Goal-driven design
For each camera, the DORI goal and the evidence need are defined in writing. There’s no room for guesswork.
Products suited to site conditions
Night, backlight, dust, humidity and vibration are factored into product selection.
Documented commissioning
A project isn’t closed without as-built drawings, an inventory and an acceptance test.
Services
Our IP Cameras and Site Systems services
The scope, technical details, project deliverables, acceptance criteria and FAQs are on each service’s own page.
Camera privacy impact assessment: purpose and necessity analysis before installation, less intrusive alternatives, a risk–measure table, a justification record and approval.
Map flows between cameras, NVR/VMS and infrastructure services into a port and protocol matrix; derive least-privilege ACLs, with a Cisco IOS example and counter-based testing.
Camera acceptance testing: image/DORI checks from recordings, retention and NTP verification, alarm, network and access tests, a test–criterion–evidence table and the structure of the acceptance record.
A schema of mandatory fields for a camera inventory, a naming and site labeling standard, automatic discovery with ONVIF and switch tables, and accuracy audits.
Residential complex camera system design: a common area coverage table, correcting cameras facing private areas, role-based access, recording requests and secure export.
Why is face recognition different under KVKK? The difference between face detection and recognition, biometric templates, data risk by type of analytics and privacy controls at installation.
Frequently asked questions
About IP Cameras and Site Systems
01
How do you determine how many cameras are needed?
The number of cameras isn’t a starting input but the result of the design. First the risk points and the image goal needed at each point (detection, observation, recognition, identification) are worked out; then the field of view and lens that meet this goal are calculated. The number comes last.
02
Can we keep using our existing cameras?
The model, firmware, protocol and image quality are examined one by one. Devices that meet the goal and still receive security updates stay on site; for the rest, we draw up a phased replacement plan.
03
Do you work with a particular brand?
No. The product is determined by the project’s needs, VMS compatibility, cybersecurity requirements and budget; we evaluate different vendors against these criteria. We don’t claim to be an authorized representative of any vendor.
Video Surveillance
Let’s plan your IP Cameras and Site Systems project together
In a short survey call, we listen to your facility, existing system and goals. Then we send a written proposal covering the scope, technical approach and deliverables.