How to Carry Out a Privacy Impact Assessment for Camera Projects
Camera privacy impact assessment: purpose and necessity analysis before installation, less intrusive alternatives, a risk–measure table, a justification record and approval.
We design IP camera systems for factories, warehouses, car parks and multi-site businesses, and we also take on IP camera installation and periodic maintenance. During the site survey we determine camera positions, recording capacity and network infrastructure; at handover we test daytime and night images, recording access and alarm scenarios.
Vendor-independent designMeasured acceptance criteriaPost-installation maintenance and reporting
We can set up a new system, renew your existing recording infrastructure or assess just the image quality, retention period and network of a single area.
We plan camera position, lens and mounting according to the detail that needs to be seen on site. We assess outdoor, PTZ, panoramic and thermal camera options according to light, distance and environmental conditions.
We design NVR, VMS and storage capacity around your recording goal. We check playback, archiving and recording behavior in the event of a failure.
We assess suitable analytics options for human and vehicle detection, virtual fences, license plate reading, smart search and site alerts. We define success criteria before the pilot and measure the results on site.
We determine the recording need in factories, warehouses, car parks, stores, construction sites and common areas according to site conditions and the purpose of use.
We offer design and installation for PoE power calculation, fiber backbone, camera network separation, device updates and authorized remote access.
We match access, alarm, shipping or production events with the relevant camera and time range. We verify the functions to be used against the interfaces supported by the device and software.
We review viewing, recording access, export and retention settings against the defined purpose and permissions. In a technical audit, we report the findings and the work to be done.
We periodically check camera angles, night images, device clocks, disk health and access to recordings. We carry out renewals, capacity increases and software updates in planned work windows.
Go to the request and contact form.
We make it easier to reach the relevant footage with rules such as human and vehicle classification, line crossing and area entry. Filters by time, camera, zone and object class can be used depending on the support of the selected camera and recording software. In the pilot, we measure false alarms, missed events and how long it takes for a notification to arrive.
We don’t guarantee an overall accuracy rate. Facial recognition and individual person tracking are outside our standard service scope.
Human / vehicle / objectSmart searchVirtual fenceHazardous zoneLicense plate recognitionFalse alarm analysis
We define separately which image is needed for the production line, warehouse, loading dock and site perimeter. We select camera and mounting equipment according to light, dust, temperature and vibration conditions. Connections to the production network, recording access and the relevant physical security expectations of automotive customers are addressed at the start of the project.
We calculate channel limits, incoming bitrate, recording quality, usable disk capacity and the retention goal together. We check live monitoring, playback, user permissions and fault notifications before handover. The choice between NVR and VMS is determined by the number of cameras, locations, integrations and permission needs.
Recording sized by channels, resolution, disks and event density.
Single management across multiple sites, incident investigation and role-based access.
Disk capacity is calculated not by estimating days but from bitrate, recording schedule and retention goal.
We identify single points of failure in the recording chain and test how much recording could be lost in which failure.
For the decision, see the VMS or NVR? guide; for the capacity calculation, see the how many days does an NVR record? guide.
During the site survey we calculate the power the cameras need, the switch’s total PoE budget and the recording traffic. We restrict camera, recording and management access with separate network rules and plan remote access for authorized users. We choose switches based on port count, power and link capacity.
PoE / PoE+ / PoE++Fiber backboneVLANVPNUPS
Risk, environmental conditions and privacy expectations differ in production, logistics, car parks, retail, construction sites, critical infrastructure and residential common areas. The design is made for the site.
Loading and damage evidence at docks, shipping, aisles and storage areas.
One design from barrier to plate, and from plate to incident investigation.
Proportionate, purpose-bound monitoring at checkouts, stock and customer areas.
Cameras, power and mobile connectivity that can be moved as the layout changes.
Layered detection and visual verification along a long perimeter line.
The security need in common areas is designed together with residents’ privacy.
An installation isn’t considered finished until the field of view, recording continuity and access have been tested.
We verify the security need, incident scenarios and existing infrastructure on site.
Camera, network, PoE, recording, disk and power capacity are calculated together; a specification is written.
Standard naming, hardened settings and documented mounting.
Day/night image, recording continuity, retention, network and permission tests, documented in a signed report.
Health monitoring, periodic maintenance, firmware management and a monthly report.
In maintenance, the camera’s view, night image, device clock, disk health and access to recordings are checked separately. In renewal projects, we determine from the start which camera will be moved when, how old recordings will be accessed and the planned downtime window.
Lenses get dirty, disks age, clocks drift. Maintenance catches these regularly.
We plan the migration zone by zone. At critical points we consider temporary or parallel recording if needed, and include any recording gap that may occur during the migration in the acceptance test.
Health monitoring, fault logging and a monthly report on multi-device sites.
A camera showing an image doesn’t mean it’s recording. We measure it.
Site survey, installation, modernization, maintenance and technical review can be planned separately as needed.
Site survey, risk and scenario analysis, camera placement; network, recording and power capacity calculation, technical specification.
Product selection, mounting and cabling, network and recording configuration, analytics scenarios, testing and commissioning.
We renew analog or old IP systems zone by zone. At critical points we consider temporary or parallel recording if needed, and include any recording gap that may occur during the migration in the acceptance test.
Physical maintenance with a checklist; checks of recording continuity, disk health, firmware and clock sync, and a report.
Remote health monitoring, fault and recording interruption alarms, user and permission management, a monthly report and support times defined in the contract.
An independent review of the existing system in terms of image, recording, network, cybersecurity, access and KVKK (Turkish data protection law) practice, with evidence for findings.
These models aren’t fixed-price packages. The scope is determined by the number of cameras, site conditions, cable distances, recording and retention needs, analytics scenarios and integrations; these become clear during the site survey. Support times and scope are written in the contract.
Camera recordings showing identified or identifiable people are personal data. We configure camera angles, notice points, recording access, export and destruction settings according to the purpose and permissions defined by your organization. In TISAX or ISO 27001 preparation, we help organize existing records for the relevant physical security controls. We don’t give legal opinions or certification guarantees.
Camera privacy impact assessment: purpose and necessity analysis before installation, less intrusive alternatives, a risk–measure table, a justification record and approval.
Map flows between cameras, NVR/VMS and infrastructure services into a port and protocol matrix; derive least-privilege ACLs, with a Cisco IOS example and counter-based testing.
Camera acceptance testing: image/DORI checks from recordings, retention and NTP verification, alarm, network and access tests, a test–criterion–evidence table and the structure of the acceptance record.
A schema of mandatory fields for a camera inventory, a naming and site labeling standard, automatic discovery with ONVIF and switch tables, and accuracy audits.
Residential complex camera system design: a common area coverage table, correcting cameras facing private areas, role-based access, recording requests and secure export.
Why is face recognition different under KVKK? The difference between face detection and recognition, biometric templates, data risk by type of analytics and privacy controls at installation.
No. Our job isn’t selling products but designing the system: site survey, camera placement, network and PoE infrastructure, NVR/VMS and storage, AI video analytics, integration, KVKK and access controls, acceptance testing and post-installation maintenance. The product is chosen from the vendor that suits the project as a result of this design.
We assess vendors suited to the project and the existing system. Field of view, night image, compatibility with the recording software, update support and maintenance cost are decisive in the choice. We verify the models and functions to be used together with you.
If set up correctly, it can bring a clear improvement over motion detection. But the result depends on the camera angle, lighting, scenario and threshold settings. That’s why we run a pilot before installation and measure the false alarm and missed event rates on your own site. We don’t guarantee an overall success rate.
The number of cameras, the measured bitrate, the recording schedule and the usable disk capacity determine the technical period. The retention policy, on the other hand, is determined by the purpose of recording, the period needed and any applicable specific obligations. We calculate storage for this goal and check the oldest recording actually accessible on the live system.
Depending on the installation scope, continuous or event-based recording, automatic device health checks and notifications can be provided. Staffed live monitoring is outside our current service scope. Forwarding images or alarms to your organization’s security team or a service provider of your choice can be planned separately.
We don’t give fixed package prices. The scope is determined by the number of cameras, site conditions, cable distances, recording and retention requirements, analytics scenarios and integrations; these become clear during the site survey. The quote lists products, labor, phases, deliverables and assumptions separately.
Yes. We have managed support models that include periodic maintenance, annual maintenance agreements, remote health monitoring and monthly reporting. Response times and scope are defined in the contract.
We deliver IP camera projects across Türkiye. We start with an on-site survey for camera placement, cabling and recording capacity, and complete installation and commissioning on site. Recording checks, software updates and remote viewing configuration are handled over secure remote access. Our service areas.
We listen to your facility, existing system and goals in a short call. Then we come back with a written proposal covering the survey scope, technical approach, deliverables and schedule.