Recording, VMS and Storage

NVR/VMS Redundancy and High Availability

We test separately which function is affected when the primary recording server, a disk, a link or the power source fails. We measure the gap that occurs when switching to the standby recording server, the transfer back of the camera’s local recording and access to older recordings.

UPS

Failover serverN+1 recordingRedundant PSUDual uplinkEdge recordingManagement DB backupFailure drill

Service definition

What is NVR and VMS high availability, and who is it for?

High availability in camera systems is the set of architectural measures that keep recording and monitoring running as uninterrupted as possible when a recording server, disk, power, network or management component fails. The required level is set by how critical the recording is and the acceptable loss duration.

01

Is recording lost during failover?

A short gap can occur during the switchover; edge recording and gap-fill features reduce it. The gap’s duration is measured in the acceptance test. If VMS redundancy is part of the facility’s wider continuity plan, set the restore order and acceptance test together for the backup and disaster recovery infrastructure.

02

Is redundancy possible with NVRs too?

Some NVRs offer N+1 or secondary recording; an enterprise VMS gives more flexible options here.

03

Do you guarantee uninterrupted recording?

No. We build and test an architecture that keeps recording in defined failure scenarios; scenarios outside the scope are stated clearly in the report.

Project stages

How do we proceed?

01 / STAGE

Analysis

Single points of failure and targets.

02 / STAGE

Design

Redundant architecture.

03 / STAGE

Implementation

Installation and configuration.

04 / STAGE

Exercise

Failure tests and report.

Video Surveillance

Let’s test together how recording behaves when a server fails

Let’s talk about the current situation on site and the goal. We’ll send the scope, deliverables and steps in a written proposal.