Maintenance, Modernization and Management

Periodic Maintenance and Support for Camera Systems

During maintenance, the camera’s view, night image, device clock, disk health and recording access are checked separately. In checklist-based periodic maintenance, we measure and log the same items on every visit and report findings with a prioritized list of recommendations.

ChecklistLens and housingAngle and focusCabling and PoEDisks and RAIDRecording continuityClock syncMaintenance report

Service definition

What is periodic camera system maintenance, and who is it for?

Periodic maintenance is a service in which the physical (lens, housing, mounting, cabling) and logical (recording, storage, clock, firmware, users) components of a camera system are checked, cleaned, adjusted and reported at set intervals. What sets it apart from fault repair is that it looks for problems before they become failures.

01

Is fault repair included in the maintenance agreement?

It depends on the contract scope. Labor, parts and response times are defined separately in the agreement.

02

Do you maintain systems installed by another company?

Yes. First a baseline assessment and access handover are done; maintenance doesn’t start until the current state is documented.

03

Is recording interrupted during maintenance?

During physical maintenance, only the camera concerned may be briefly affected; the recording system keeps running.

Project stages

How do we proceed?

01 / STAGE

Baseline assessment

Inventory and initial state.

02 / STAGE

Plan

Frequency and scope.

03 / STAGE

Maintenance visits

Checklist.

04 / STAGE

Reporting

Results and recommendations.

Video Surveillance

Let’s have your camera system measured and reported regularly

Let’s talk about your camera fleet and environmental conditions; we’ll clarify the maintenance frequency and scope and come back with a concrete proposal.