Cameras, Racks and Power · #75
Online CCTV Storage Calculator
Calculates total storage and retention days from the bitrate and recording time of camera groups.
- Data is processed in your browser and not sent to a server
- Export: CSV
Tool
What does this tool do?
Recording space is driven by bitrate, not resolution. The same 4 MP camera may produce 2 Mbit/s with H.265 on a static scene and 8 Mbit/s with night noise or motion. The tool calculates daily and total space per group, adds file system/event headroom and shows how many days existing disk capacity lasts.
How to use it
- Enter one camera group per line:
name;cameras;Mbit/s;hours/day;days. - Enter headroom (%) and, if known, the NVR's usable capacity (TB after RAID).
- Press Run; download the table as CSV.
Fields
- Camera groups
- name;count;Mbit/s;hours;days — dot for decimals.
- Headroom
- For file system, events and exports.
- Usable capacity
- After RAID; optional.
Worked example
| Input | Value |
|---|---|
| Camera groups | |
| Headroom | 10 |
| Usable capacity | 40 |
Expected result: 44 cameras, 1.52 TB per day (with headroom), 45.62 TB needed for 30 days; 40 TB usable lasts 26 days.
For the 30-day target you need about 5.6 TB more or a lower night bitrate on the warehouse cameras. Take bitrates as 24-hour averages from the camera statistics page; 'typical' values from vendor calculators are too low for night scenes.
Second scenario
| Input | Value |
|---|---|
| Camera groups | |
| Headroom | 10 |
| Usable capacity | 16 |
Expected result: 4 lobby cameras, 3 Mbit/s, 90 days: 12.83 TB; fits into 16 TB.
Method and assumptions
Bytes = cameras × Mbit/s × 106 / 8 × hours × 3600 × days. Total = Σ groups × (1 + headroom). Possible days = usable / daily total with headroom, rounded down.
Using the result and troubleshooting
Get usable capacity from the RAID Capacity Calculator (not the disk label). Use the CCTV Bandwidth Calculator for network load and the CCTV Project Capacity Summary for PoE and totals.
Limits and common mistakes
- With motion recording real space depends on scene activity; continuous recording is assumed here (approximate by scaling hours). Sub-stream recording must be entered as a separate group.
Frequently asked questions
How much does H.265 save?
Typically 30–50 % compared with H.264 at the same quality, but camera 'smart codec' settings and the scene decide. A measured average bitrate is best.
Related tools and service
- CCTV Bandwidth CalculatorCalculates recording (into the NVR) and viewing (out to clients) traffic separately.
- CCTV Project Capacity SummaryCombines storage, network and PoE needs of a camera project in one table.
- RAID Capacity CalculatorCalculates usable capacity, efficiency and fault tolerance of a RAID array.
Related service: Camera Recording Storage and Capacity Planning