Cameras, Racks and Power · #79
Online CCTV Project Capacity Summary
Combines storage, network and PoE needs of a camera project in one table.
- Data is processed in your browser and not sent to a server
- Export: XLSX, CSV
Tool
What does this tool do?
When quoting after a site survey, disk, switch and NVR choices all depend on the same camera list; when separate calculations miss a group, NVR or PoE budget falls short on site. The tool runs the engines of the CCTV Storage, CCTV Bandwidth and PoE Budget tools on the same list and returns a multi-sheet XLSX.
How to use it
- CSV header:
group, cams, mbps, daysrequired;sub_mbps, poe_w, hoursoptional (hours default 24). - Enter storage headroom and usable capacity, PoE standard, switch PoE budget and margin, uplink speed and number of concurrent viewing streams.
- Press Run; download XLSX or CSV.
Fields
- Camera groups (CSV)
- poe_w = the camera's maximum consumption (PD) from the datasheet.
- Storage headroom
- Usable disk
- After RAID; optional.
- PoE standard (port)
- Switch PoE budget
- Total; optional.
- PoE margin
- Safety margin kept from the budget.
- Recording uplink
- Concurrent viewing streams
- Assumed to use sub-streams.
Worked example
| Input | Value |
|---|---|
| Camera groups (CSV) | |
| Storage headroom | 10 |
| Usable disk | 80 |
| PoE standard (port) | 802.3at PoE+ (30 W) |
| Switch PoE budget | 740 |
| PoE margin | 10 |
| Recording uplink | 1000 |
| Concurrent viewing streams | 16 |
Expected result: 44 cameras: 71.28 TB storage (fits 80 TB), 200 Mbit/s recording (20 % of uplink), 651.2 W PoE (fits the 666 W left of 740 W with 10 % margin), 44 PoE ports.
The PoE budget is tight with 14.8 W left; if PTZ heaters switch on, consumption rises and the budget is exceeded. Consider a second PoE switch or a model with a higher budget.
Second scenario
| Input | Value |
|---|---|
| Camera groups (CSV) | |
| Storage headroom | 10 |
| PoE standard (port) | 802.3af (15.4 W) |
| Switch PoE budget | 120 |
| PoE margin | 0 |
Expected result: 8 shop cameras, 802.3af: 5.70 TB disk, 75.6 W PoE; fits a 120 W budget.
Method and assumptions
Storage uses the same formula as the CCTV Storage Calculator, PoE the same method as the PoE Budget tool (PD value + standard 100 m cable loss). Recording = Σ cameras × main Mbit/s; viewing = concurrent streams × average sub-stream (or main stream).
Using the result and troubleshooting
Attach the XLSX to the quote; update the table when camera counts or bitrates change on site. Check NVR channel and decoding capacity separately with the NVR tool.
Limits and common mistakes
- Ports per switch, uplink topology and NVR channel limits are not in this summary; the PoE budget assumes one switch.
Frequently asked questions
What PoE value should I enter?
The camera's maximum power from the datasheet (IR and heater on). The tool adds the 100 m cable loss using the standard value.
Related tools and service
- CCTV Storage CalculatorCalculates total storage and retention days from the bitrate and recording time of camera groups.
- CCTV Bandwidth CalculatorCalculates recording (into the NVR) and viewing (out to clients) traffic separately.
- PoE Power Budget CalculatorChecks per-port and total switch power for PoE devices separately.
- NVR Channel and Decoding CapacityShows whether an NVR carries the camera list in channels, Mbit/s and decoding.
Related service: IP Camera System Project Planning