Service category · 7 services

Camera Recording, VMS and Storage Solutions

We design NVR, VMS and storage capacity around your recording goal. We check playback, archiving and recording behavior in the event of a failure.

What do we solve in this area?

Is recording really working, and can you find what you’re looking for when you need it?

The recording layer determines what you’ll have left when an incident happens. If channels and bandwidth, codec, recording profile, disk and RAID design, retention period, user permissions and fault alerts aren’t designed together, the same sentence is heard at the first incident: “we thought it was recording.” From a single NVR to a multi-site corporate VMS, we build the recording architecture by calculating it and hand it over by measuring it.

Calculated capacity

Bitrate, days and disk calculations are written down with their assumptions. Then they’re measured on site.

Recording continuity

Disk, channel and recording interruption alarms are tested one by one before going live.

Quick access

An authorized user’s playback and export steps are tried before handover.

Where to start?

The right starting point for your situation

Recommended starting service

NVR Recording System Installation and Management

Multiple sites and central monitoring

Recommended starting service

Enterprise VMS Platforms

Disks are full and the retention period isn’t enough

Recommended starting service

Camera Recording Storage and Capacity Planning

Critical recordings exist in a single copy

Recommended starting service

Video Recording Backup and Archiving

Cameras of different brands must work in one system

Recommended starting service

ONVIF and RTSP Camera Integration

Knowledge center

Recording, VMS and Storage guides

Frequently asked questions

About Recording, VMS and Storage

01

Should we choose an NVR or a VMS?

The choice between NVR and VMS is determined by the number of cameras, locations, integrations and permission needs. For a single facility with a limited number of cameras and a simple user structure, an NVR may be enough; if multiple sites, mixed brands, detailed authorization or redundant recording are needed, a corporate VMS is considered. The details are in our VMS or NVR guide.

02

How many days should we keep our recordings?

No single number of days is used for general camera applications. Any sector-specific obligation, the purpose of recording and the period needed are assessed together; the organization determines the period and puts it in writing. On the technical side, we calculate the capacity to meet this period.

03

How is recording loss prevented when a disk fails?

A suitable RAID level, a hot spare disk, S.M.A.R.T. and recording interruption alarms; secondary recording or a redundant server for critical cameras. A single disk is a single point of failure. The criticality of the recording determines which level is needed.

Video Surveillance

Let’s plan your Recording, VMS and Storage project together

In a short survey call, we listen to your facility, existing system and goals; we come back with a written proposal covering the scope, technical approach and deliverables.