The camera network is the layer that carries the video and where an attack can get in
An IP camera is a computer running on the network. A PoE switch with an insufficient power budget, a congested uplink or an NVR exposed to the internet affects the whole system; these are the first places to look when cameras drop out. In this category, we design the camera network in terms of power, bandwidth, segmentation, access and monitoring. The general scope of corporate network security is handled with Eretek Cybersecurity, and the general design of network infrastructure with Eretek Network.
Measured capacity
The PoE budget, ports and uplink bandwidth are chosen with a written calculation. Not by guesswork.
Separated network
Camera, recording and management traffic run on separate networks and talk under written rules.
Closed external surface
Remote access limited to authorized users and logged.
Services
Our Network and Cybersecurity services
Each service’s scope, technical details, deliverables, acceptance criteria and frequently asked questions are on its own page.
Camera privacy impact assessment: purpose and necessity analysis before installation, less intrusive alternatives, a risk–measure table, a justification record and approval.
Map flows between cameras, NVR/VMS and infrastructure services into a port and protocol matrix; derive least-privilege ACLs, with a Cisco IOS example and counter-based testing.
Camera acceptance testing: image/DORI checks from recordings, retention and NTP verification, alarm, network and access tests, a test–criterion–evidence table and the structure of the acceptance record.
A schema of mandatory fields for a camera inventory, a naming and site labeling standard, automatic discovery with ONVIF and switch tables, and accuracy audits.
Residential complex camera system design: a common area coverage table, correcting cameras facing private areas, role-based access, recording requests and secure export.
Why is face recognition different under KVKK? The difference between face detection and recognition, biometric templates, data risk by type of analytics and privacy controls at installation.
Frequently asked questions
About Network and Cybersecurity
01
Why should we separate the camera network?
Cameras aren’t updated as often as computers and there are many of them; that means a large attack surface. A separate VLAN and access rules limit spread from a compromised camera to other systems. Video traffic also doesn’t choke the business network.
02
Can switches other than Cisco be used?
Yes. Criteria determine the choice, not the brand: PoE standard, power per port, total budget, management and security features, support and the end-of-life schedule. We evaluate suitable models from Cisco and other enterprise vendors against these criteria.
03
Do the cameras keep working during a power outage?
Yes, if the UPS has been sized to cover the switches and recorders. The duration is determined by the load and battery capacity calculation. Which cameras will work during an outage is decided at the design stage.
Video Surveillance
Let’s measure and plan your camera network together
In a short survey call, we listen to your facility, existing system and goals. Then we come back with a written proposal covering the scope, technical approach and deliverables.