IP Cameras and Site Systems

Camera Positioning and Blind Spot Analysis

For each camera, we determine the area to be monitored, the image detail needed and the purpose of recording. We verify the coverage calculation on the plan with sample recordings taken on site by day and at night. We mark blind spots, unnecessary overlaps and night weaknesses on the plan; we recommend re-aiming first and additional cameras if needed.

Coverage mapBlind spot detectionDORI checkNight checkRe-aimingOverlap analysisPrioritized action listReport on the plan

Service definition

What is camera positioning and blind spot analysis, and who is it for?

Blind spot analysis compares the position, angle, lens and image settings of existing cameras with the facility’s risk map. The area each camera sees is drawn on the plan, the image level needed at critical points is checked, and areas where no camera produces evidence are marked. The output is a concrete list of improvements ranked by cost.

01

Do you need to come on site for the analysis?

Yes. Plans and recordings can be reviewed remotely; but mounting, obstructions and lighting can only be verified on site.

02

Do we have to buy the installation from you after the analysis?

No. The report is independent of the installer; if you wish, we do the implementation.

03

How long does it take?

It depends on the number of cameras and the size of the site. For a single facility, a few days of site work and a week of reporting are usually enough.

Project stages

How do we proceed?

01 / STAGE

Inventory

Camera and plan information.

02 / STAGE

Site and recording review

Day–night image check.

03 / STAGE

Analysis

Coverage map and blind spots.

04 / STAGE

Report and action

Ranked recommendations and presentation.

Video Surveillance

Let’s find out what your existing cameras actually don’t see

Let’s talk about your facility plan and incident history; we’ll clarify the scope and come back with a concrete analysis proposal.