IP Cameras and Site Systems

Wireless IP Camera Networks and Point-to-Point Bridges

Running cable or fiber between buildings, in car parks, construction sites and open-site points is either very expensive or impossible. We carry camera video from these points with point-to-point or point-to-multipoint wireless links. Line of sight, distance, frequency, capacity headroom, encryption and link monitoring are mandatory parts of the design. If one is missing, the link drops.

Point-to-pointPoint-to-multipointLine of sight (LOS)Fresnel zone5 GHz / 60 GHzCapacity headroomWPA2/WPA3 encryptionLink monitoring

Service definition

What are wireless IP cameras and bridge links, and who are they for?

A wireless bridge is a network link set up with directional antennas between two or more points. In camera systems, it connects a remote building, a gate point or a temporary site to the main network. Since the video stream is continuous, capacity and latency must stay constant all day. The device brand doesn’t ensure this; a correct analysis of line of sight, distance, interference and weather conditions does.

01

How far can a wireless bridge reach?

Depending on the device, antenna and frequency, from a few hundred meters up to kilometers. What decides it isn’t the catalog distance but the line of sight and the real capacity needed.

02

Do weather conditions affect it?

5 GHz links are only slightly affected by rain; higher frequencies such as 60 GHz are much more sensitive to rain and distance. We choose the frequency according to the distance.

03

Can wireless (Wi-Fi) cameras be used?

In corporate systems, wired cameras, with a bridge link where needed, are preferred for continuous recording. With Wi-Fi cameras, interference, connection continuity and security settings must be assessed separately.

Project stages

How do we proceed?

01 / STAGE

Study

Location, line of sight and interference.

02 / STAGE

Design

Capacity, devices and antennas.

03 / STAGE

Setup

Mounting, alignment and security.

04 / STAGE

Acceptance

Measurement and handover of monitoring.

Video Surveillance

Let’s connect the point cable can’t reach with a reliable link

Let’s talk about the points to be connected and the camera load; we’ll clarify the scope and deliverables and come back with a concrete proposal.