IP Cameras and Site Systems

IP Camera Project Planning and System Design

For each camera, we determine the area to be monitored, the image detail needed and the purpose of recording. We verify the coverage calculation on the plan with sample recordings taken on site by day and at night. The output is a vendor-independent IP camera project, ready for tendering and implementation.

Site surveyRisk and scenario analysisDORI goalsLens and angle calculationPoE and networkRecording capacityTechnical specificationAcceptance criteria

Service definition

What is IP camera project planning, and who is it for?

IP camera project planning turns a facility’s security and operational goals into concrete requirements: the image level needed at each point, the camera type and position that will deliver it, and then the network, power, recording and management needs. The output isn’t a product list. It’s project documentation that explains what was chosen and why, makes it possible to get comparable quotes from different contractors and to check the installation against acceptance criteria.

01

Is project planning a paid service?

The short preliminary call is free. Project planning, covering on-site measurement, layout on the plan and producing the specification, is a separate service; it’s quoted according to the size of the facility.

02

If you prepare the project, do you also have to do the installation?

No. The specification is prepared independently of vendor and contractor; another company can do the installation. If you wish, we run the acceptance tests during installation.

03

How many days does it take?

For a single-building facility, the survey can take a few days and design and reporting one to two weeks. On multi-building campuses, the duration is determined by the planning and approval cycles.

04

Are existing cameras included in the project?

Yes. We check whether the existing device meets the image goal, and its firmware and security support. Usable devices keep their place in the new design.

Project stages

How do we proceed?

01 / STAGE

Goal and scenario

Risks, incidents and responsible parties are clarified.

02 / STAGE

Site survey

Points, surfaces, lighting and routes are examined on site.

03 / STAGE

Design and calculation

Layout, network, recording and power capacity are calculated.

04 / STAGE

Specification

A vendor-independent specification and bill of quantities are written.

STAGE 05

Quote and acceptance support

Quotes are compared on the same criteria; installation is tied to acceptance testing.

Video Surveillance

Let’s prepare a project that starts with the security goal, not the camera count

Share your facility plan and risks. We’ll come back with a written proposal covering the survey scope, work schedule and documents to be delivered.

We plan IP camera projects across Türkiye; camera placement and cable routes are first determined with an on-site survey. Our service areas.