Service category · 7 services

Camera Network Infrastructure and Cybersecurity

We offer design and installation for PoE power calculation, fiber backbone, camera network separation, device updates and authorized remote access.

What do we solve in this area?

The camera network is the layer that carries the video and where an attack can get in

An IP camera is a computer running on the network. A PoE switch with an insufficient power budget, a congested uplink or an NVR exposed to the internet affects the whole system; these are the first places to look when cameras drop out. In this category, we design the camera network in terms of power, bandwidth, segmentation, access and monitoring. The general scope of corporate network security is handled with Eretek Cybersecurity, and the general design of network infrastructure with Eretek Network.

Measured capacity

The PoE budget, ports and uplink bandwidth are chosen with a written calculation. Not by guesswork.

Separated network

Camera, recording and management traffic run on separate networks and talk under written rules.

Closed external surface

Remote access limited to authorized users and logged.

Where to start?

The right starting point for your situation

Recommended starting service

PoE Switches and Camera Network Infrastructure

We need connections to remote buildings and sites

Recommended starting service

Fiber Optic Camera Backbone Design

The cameras are on the same network as the office

Recommended starting service

Camera VLANs and Network Segmentation

A port to the NVR is open from outside

Recommended starting service

IP Camera and NVR Cybersecurity Hardening

Managers want to monitor on mobile

Recommended starting service

Secure Remote Camera Access

Knowledge center

Network and Cybersecurity guides

Frequently asked questions

About Network and Cybersecurity

01

Why should we separate the camera network?

Cameras aren’t updated as often as computers and there are many of them; that means a large attack surface. A separate VLAN and access rules limit spread from a compromised camera to other systems. Video traffic also doesn’t choke the business network.

02

Can switches other than Cisco be used?

Yes. Criteria determine the choice, not the brand: PoE standard, power per port, total budget, management and security features, support and the end-of-life schedule. We evaluate suitable models from Cisco and other enterprise vendors against these criteria.

03

Do the cameras keep working during a power outage?

Yes, if the UPS has been sized to cover the switches and recorders. The duration is determined by the load and battery capacity calculation. Which cameras will work during an outage is decided at the design stage.

Video Surveillance

Let’s measure and plan your camera network together

In a short survey call, we listen to your facility, existing system and goals. Then we come back with a written proposal covering the scope, technical approach and deliverables.