IP Cameras and Site Systems

Panoramic and Fisheye Camera Solutions

We design panoramic and fisheye cameras that give 180° and 360° coverage in stores, lobbies, canteens, warehouse aisles and common areas based on mounting height, pixel density, dewarping (image correction) and VMS compatibility. These cameras give the overall picture. We cover points that need detail with fixed cameras.

360° fisheye180° panoramicMulti-sensorDewarpingCeiling mountPixel densityCounting and heat mapsVMS compatibility

Service definition

What are panoramic and fisheye cameras, and who are they for?

A fisheye camera gives a hemispherical 360° view with a single lens; panoramic and multi-sensor cameras stitch several images together to offer 180° or a wider angle. They’re suitable for seeing movement and flow in an area. But because of dewarping and pixel distribution, they often can’t deliver evidence-level detail on their own.

01

How many fixed cameras can a fisheye replace?

For general monitoring, it can do the job of several fixed cameras. Where detail is needed, it doesn’t replace a fixed camera.

02

Should the fisheye image or the corrected image be recorded?

Usually the raw fisheye image is recorded and corrected when viewing; that way different areas can be examined later. We decide based on VMS support.

03

Will bandwidth be too high?

High-resolution fisheye cameras have a high bitrate; it’s included in the recording and network capacity calculation from the start.

Project stages

How do we proceed?

01 / STAGE

Analysis

Area, flow and critical points.

02 / STAGE

Design

Camera type, mounting and calculation.

03 / STAGE

Installation and tuning

Mounting, dewarping and VMS views.

04 / STAGE

Acceptance

Recording and view tests.

Video Surveillance

Let’s monitor large areas with few cameras and the right expectations

Let’s talk about the existing system and the goal; we’ll come back with a proposal with a clarified scope and deliverables.