Service category · 7 services

Camera Maintenance and Modernization Services

We periodically check camera angles, night images, device clocks, disk health and access to recordings. We carry out renewals, capacity increases and software updates in planned work windows.

What do we solve in this area?

A video surveillance system that keeps working, measured and reported, after installation too

A dirty lens, a full disk, a drifting clock, firmware that isn’t updated and a changed site layout may not raise an alarm on their own. This category covers periodic maintenance that extends the life of the existing investment, planned modernization of old systems, independent surveys and acceptance testing for new projects, and contracted managed support.

Maintenance with a checklist

Every visit is carried out with measured and reported items. No eyeballed maintenance.

Planned modernization

Analog and old systems are renewed in budget-friendly phases.

Defined support

Response times and responsibilities are written in the contract, not left to interpretation.

Services

Our Maintenance, Modernization and Management services

Each service’s scope, technical details, project deliverables, acceptance criteria and FAQ are on its own page.

Where to start?

The right starting point for your situation

Recommended starting service

Camera Periodic Maintenance and Support

Our analog system is inadequate

Recommended starting service

Migrating from Analog CCTV Systems to IP Cameras

NVR disks are faulty or full

Recommended starting service

NVR Disk Failures and Capacity Expansion

We want an independent view for a new project

Recommended starting service

Camera System Site Surveys and Consulting

We want our multi-site system managed externally

Recommended starting service

Managed Camera Service and SLA

Knowledge center

Maintenance, Modernization and Management guides

Frequently asked questions

About Maintenance, Modernization and Management

01

How often should maintenance be done?

It depends on the environment and criticality. In an office environment, one or two physical maintenance visits a year are often enough; in dusty production areas and outdoors, cleaning and checks are needed more often. Remote health checks, on the other hand, can be done continuously.

02

Do you take on maintenance of a system installed by another company?

Yes. First an inventory and technical assessment are carried out, and access credentials and documentation are handed over. Then we present the maintenance scope and a prioritized list of improvements.

03

What do you guarantee with an SLA?

The SLA defines the response and intervention times, scope and reporting set out in the contract. It isn’t a guarantee of uninterrupted operation. We set the targets together according to the site’s criticality and the spare parts strategy.

Video Surveillance

Let’s plan your Maintenance, Modernization and Management project together

In a short survey call, we listen to your facility, existing system and goals; we come back with a written proposal covering the scope, technical approach and deliverables.