Continuous or Event-Based Recording? Choosing the Recording Mode
Continuous and event-based recording: what motion detection misses, pre- and post-event durations, hybrid recording calculations and choosing the mode by camera location.
Guides on NVR retention and storage calculation, choosing between VMS and NVR, H.265 vs H.264 and ONVIF profiles.
Continuous and event-based recording: what motion detection misses, pre- and post-event durations, hybrid recording calculations and choosing the mode by camera location.
Camera stream profiles: separating main, sub and third streams for recording, live viewing, mobile and analytics, ONVIF profile tokens and mistakes commonly seen on site.
Proving a camera recording hasn’t been altered: the difference between watermarks, SHA-256 and digital signatures, signed export, NTP consistency and the verification sequence followed on site.
DAS, iSCSI and NAS for video recording: VMS support, a separate storage network, jumbo frame pitfalls, multipathing with MPIO and sustained write testing with fio/DiskSpd.
VMS failover design: N+1 and hot standby recording servers, management and SQL redundancy, calculating the failover recording gap and the test sequence applied on site.
The difference between live recording, archive and backup; hot and cold tiers, object storage, LTO tape, locking incident recordings and a ransomware-protected copy.
Edge recording to the camera’s SD card, backfilling after a network outage (ANR), VMS backfill, SD card endurance, ONVIF Profile G and on-site test steps.
The difference between CBR, VBR and capped VBR on IP cameras, GOP and I-frame interval, smart codec behavior, night-time noise and measuring the real bitrate with ffprobe.
Disk selection for NVRs and recording servers: workload rating calculation, the CMR/SMR difference, vibration, SCT ERC, SMART monitoring and the manufacturer’s disk compatibility list.
A comparison of RAID 5, 6, 10 and non-RAID layouts on NVRs and recording servers in terms of capacity, write penalty and rebuild risk with large disks.
H.265 vs H.264: bitrate gains on site, GOP and VBR settings, smart codec risks, client GPU load, compatibility and capacity calculation.
NVR or enterprise VMS? Camera count, sites, mixed brands, permissions, integration, failover, total cost of ownership and common selection mistakes on site.
For articles on other topics, you can browse the Knowledge Center.