How to Prepare a KVKK Camera Privacy Notice and Warning Sign

Camera privacy notice and warning sign: two-layer information, the mandatory elements of the notice, sign placement and mistakes where the notice contradicts NVR settings.
Technical summary
Technology
KVKK Law No. 6698, Communiqué on the Duty to Inform, CCTV, VMS
Topic
Privacy notice and warning sign for cameras
Level
Beginner–intermediate
Prerequisites
  • Camera layout plan and coverage areas
  • A defined recording retention period
  • Personal data processing inventory
In this article7 sections

Many organizations hang a sign reading “CCTV in operation” on the door and think they’ve fulfilled the duty to inform. The sign alone doesn’t do this job. Article 10 of Law No. 6698 on the Protection of Personal Data (KVKK) requires the person whose image is captured to be informed when the data is obtained; for cameras, that moment is the second the person enters the field of view. Nor can a two-page notice be hung on a door. The solution is layered information: a short sign, a complete notice behind it, and both being exactly consistent with the system’s real settings.

What the duty to inform covers

Under KVKK, the data controller must inform the data subject when obtaining personal data. The duty doesn’t depend on the person asking; it applies whatever legal basis the processing relies on. The procedures and principles are set out in the Communiqué on the Procedures and Principles to Be Followed in Fulfilling the Duty to Inform, published in the Official Gazette on 10 March 2018. You can access the current texts on mevzuat.gov.tr, and the Authority’s guidance and decisions on kvkk.gov.tr.

In camera systems, the moment of “obtaining” is the moment a person enters the camera’s field of view. That’s why informing has to start outside the recording area. Car park entrances, building façades, loading docks and indoor passages are handled separately. A common gap: there’s a sign at the main gate, but a person going straight from the car park into the building or entering through a side door doesn’t pass any sign. Every entry route is a separate information point.

A privacy notice doesn’t replace obligations such as the retention period, access permissions and destruction; it’s their public face toward the individual. Every sentence you write in the notice must match the system’s real behavior. If the notice says “recordings are kept for 30 days,” the NVR or VMS retention setting must also be configured for 30 days. If it’s 30 days on paper and “until full” on disk, the notice is giving false information. How to set the period is explained separately in the camera recording retention period guide.

Layered information: sign and detailed notice

In camera areas, information is given in two layers. The first layer is the warning sign the person sees before entering the recording area: short, with a pictogram, readable in a few seconds. The second layer is the detailed privacy notice carrying all the elements in Article 10 of the Law. The sign states clearly how to reach this notice (short URL, QR code, reception). The European Data Protection Board’s (EDPB) Guidelines 3/2019 on processing of personal data through video devices also recommend the same two-layer model; this structure is widely used in KVKK practice too.

Layer Medium Content
Layer 1 Warning sign, entrance label Camera symbol, data controller, main purpose, how to reach the second layer
Layer 2 Web page, printed notice, intranet All Article 10 elements, retention, rights, how to apply
Supplement for a specific group Employee policy, supplier instructions Purpose, scope and rules specific to the group

The second layer must also be reachable for someone without internet access. A printed copy at reception or the security booth closes this gap. With QR codes, the point to watch is the permanence of the address. The website is redesigned, the page path changes, the QR code on the sign lands on a 404 page; and nobody notices. Link the QR code to a short redirect address that won’t change, and add this address to the checklist for website changes.

Elements the detailed notice must contain

Article 10 of the Law and the Communiqué set the minimum content of the notice. The table below shows what each element means for cameras.

Element What it means for cameras
Identity of the data controller The legal entity’s name, address and contact channel; the representative, if any
Purposes of processing Concrete purposes such as building and facility security, protecting assets, incident investigation
Legal ground The KVKK Article 5 basis relied on for each purpose
Method of collection Automated image recording by fixed cameras; audio recording, if any, is stated separately
Recipients and purpose of transfer Private security company, maintenance company, authorized public bodies, cloud VMS provider
Rights of the data subject The rights in KVKK Article 11 and how to apply

Stay away from generic phrases in purpose statements. Expressions such as “conducting our activities” or “within the scope of relevant legislation” don’t provide the specificity the Communiqué requires. Write what the camera actually does: “protecting stock in the warehouse area against theft,” “ensuring the security of building entrances.” Purpose and legal basis must also match. Instead of adding a single legal basis at the end of the list, write each purpose with its own basis; the notice becomes both readable and auditable.

The retention period and technical measures aren’t among the Article 10 elements, but they’re the first questions a reader asks; adding them to the notice makes your job easier. If the system has face recognition, license plate recognition or audio recording, these are explained separately. Biometric processing such as face recognition requires assessment as special category personal data under Article 6 of KVKK. A standard camera notice isn’t enough here. The particular risks of audio recording are examined in the audio recording in cameras guide.

Warning sign: content and placement

The sign isn’t a shortened version of the second layer; it’s the door to it. Limit its content to these elements:

  • An easily recognized camera symbol and a clear statement such as “Video recording is in operation in this area”
  • The data controller’s name (in multi-tenant buildings, which company the camera belongs to)
  • The main purpose of processing, in one sentence
  • How to reach the detailed privacy notice: short URL, QR code and/or an “available from reception” note
  • A contact channel for applications (a general email address or the address of the application form)

The basic rule of placement is simple: the person must see the sign before entering the camera’s field of view. At vehicle entrances, the sign should be at a height and size the driver can read while approaching the barrier; at pedestrian entrances, close to eye level. In areas used at night, the sign is lit or made of reflective material. If you draw each camera’s coverage area on the plan during the site survey, mark the sign points on the same plan. This is the easiest way to document sign placement in the project handover file.

Separate supplements for visitors, employees and suppliers

The same camera captures images of different groups; but these groups’ relationship with the organization and their information needs are also different. Rather than applying one notice to everyone, writing a common core notice and preparing group-specific supplements is the method that’s easiest to maintain in the long run.

Group Information channel Key topic
Visitor Sign, visitor registration point, web page Which areas are recorded, how to apply
Employee Notice given on hiring, internal policy, intranet Camera coverage of work areas, purposes recordings won’t be used for
Supplier and subcontractor Site entry instructions, contract annex Recorded areas, use of recordings in an incident
Tenants and common area users Building management announcement Which legal entity the camera belongs to

On the employee side, the privacy notice is read together with the internal policy on camera use in the workplace. It should state clearly which areas have cameras, who can access recordings and whether recordings will be used for purposes such as performance evaluation. Every point left vague becomes grounds for objection in a later disciplinary process. The legal limits of this topic are covered in detail in the employee monitoring with cameras in the workplace guide.

Common mistakes

  • A sign that says only “CCTV in operation”: A sign that doesn’t show the data controller and how to reach the second layer doesn’t let the person reach the information they need to exercise their rights.
  • Merging informing with explicit consent: The statement “by entering this area you are deemed to consent to the processing of your image” isn’t informing, nor does it constitute valid explicit consent. Informing and explicit consent are separate processes.
  • A notice that contradicts the system: The notice saying 30 days while the NVR keeps recordings until the disk fills, or recordings being transferred to a cloud service not mentioned in the notice, makes the notice unreliable.
  • Missing transfer information: If a private security company, an integrator doing remote maintenance or a cloud provider accesses recordings, these recipient groups should be stated in the notice.
  • Scope changes not reflected in the notice: When a new camera area, license plate recognition or an analytics feature is added, the notice isn’t updated; adding a “privacy notice impact” step to change management prevents this mistake.
  • Forgetting foreign-language visitors: At facilities with many foreign visitors, offering the sign and notice in the relevant languages too improves clarity.

These mistakes share the same root: the notice is written once and forgotten. The camera system, however, lives on; cameras are added, the NVR changes, the maintenance company changes. Assign an owner to the privacy notice and give it a version number and publication date. Make reviewing the notice a precondition for approving every scope change in the camera system.

The check works in this order: first extract the system’s real settings (retention period, parties recordings are transferred to, active analytics features), then compare the notice with this list line by line, and finally walk the signs on site one by one. A desk check won’t show that a sign has been removed. That the application route written in the notice actually works is just as important; send a test message to the application email address and see who reads it. How to handle applications is explained step by step in the data subject camera recording request guide.

To make the privacy notice, sign placement and system settings consistent with each other, we carry out site and document review together under our KVKK camera monitoring and privacy notice processes service.

Frequently asked questions

Informing and explicit consent are separate concepts. Informing is done in every case, whatever the legal basis relied on; explicit consent is needed only if the processing is based on explicit consent. In most organizations, camera monitoring is based on another legal basis such as legitimate interest; determine which basis is appropriate with your legal advisor.

Does a warning sign alone fulfill the duty to inform?

Usually not. The sign is a short first layer; it doesn’t have room for all the elements in Article 10 of the Law. The sign should state where the detailed notice can be read, and the second-layer notice should be accessible on the website, at the entrance or at reception.

When should the privacy notice be updated?

When the camera system’s purpose, scope, retention period, the parties with access or the technology used change. Introducing a new analytics feature, moving to a cloud VMS or handing security services over to an outside company are typical triggers.

Do visitors need to sign that they’ve read the privacy notice?

The Communiqué on the Duty to Inform places the burden of proving the duty was fulfilled on the data controller; however, no provision requires a signature from every visitor. In practice, dated photos showing sign locations, the notice’s publication dates and its version history are used to show that informing was done.

Support

Contact us for support or a discovery session on this topic.

Contact form
[email protected]

Eretek Video Surveillance

IP cameras, recording and central management infrastructure. We plan blind spots, retention periods and the camera network around the risks of each site.

Knowledge Center

Other articles