Cameras, Racks and Power · #81
Online Rack Unit Layout Planner
Places devices at U positions and shows overlaps and devices that do not fit.
- Data is processed in your browser and not sent to a server
- Export: CSV
Tool
What does this tool do?
If rules such as 'UPS at the bottom, patch panel at the top' are forgotten when rack installation starts on site, you end up removing and refitting. The tool places devices with a fixed position (pos), stacks the rest from the bottom optionally heaviest first and returns the rack view as a top-to-bottom table.
How to use it
- CSV header:
name, urequired;qty, kg, w, posoptional (pos = lowest U of the device). - Enter rack height and load capacity; choose whether heavy devices go to the bottom.
- Press Run; download the layout as CSV.
Fields
- Device list (CSV)
- pos: 1 is the lowest U. With qty > 1 only the first device is fixed.
- Rack height
- Load capacity
- Static load limit of the rack; optional.
- Place heavy devices at the bottom
Worked example
| Input | Value |
|---|---|
| Device list (CSV) | |
| Rack height | 42 |
| Load capacity | 600 |
| Place heavy devices at the bottom | ✓ |
Expected result: 19 U used, 23 U free; battery module 1–2, UPS 3–4, servers 5–10, NVR 11–12, switches 13–14; patch panel at 40 and ODF at 42 fixed; total 169 kg, 2,950 W.
You may want 1–2 U of space between servers and PoE switches for heat and cable management; the empty rows make that easy to plan. Total power feeds the PDU and UPS tools.
Second scenario
| Input | Value |
|---|---|
| Device list (CSV) | |
| Rack height | 12 |
| Place heavy devices at the bottom | ✓ |
Expected result: Six 2 U servers fill a 12 U rack exactly; there is no room for the switch.
Method and assumptions
Devices with pos are placed first (overlap or outside the rack is an error). The rest are sorted by weight if chosen and placed from the bottom in the first free run of enough consecutive U.
Using the result and troubleshooting
Check total power in the PDU and UPS tools and device depth and cable direction in vendor drawings. Heed the warning about devices over 25 kg in the upper half.
Limits and common mistakes
- Device depth, front/rear mounting, 0U PDUs and airflow direction are not modelled.
Frequently asked questions
Why do U numbers start at the bottom?
Most rack rails are numbered bottom to top; the tool shows the table top to bottom as if facing the rack.
Related tools and service
- PDU A/B Load CalculatorShows in an A/B-fed rack whether the remaining feed carries the load when one feed is lost.
- UPS Load and Runtime CalculatorEstimates whether the UPS carries the load and how many minutes the battery lasts.
Related service: PoE Switches and Camera Network Infrastructure