Cameras, Racks and Power · #80
Online NVR Channel and Decoding Capacity
Shows whether an NVR carries the camera list in channels, Mbit/s and decoding.
- Data is processed in your browser and not sent to a server
Tool
What does this tool do?
An NVR datasheet has three separate limits: channel count, incoming bandwidth and decoding capacity (e.g. '16 × 1080p'). Even when channels suffice, 4K cameras can exceed incoming bandwidth or the number of cameras that can be shown at once. The tool checks all three from resolution and bitrate.
How to use it
- Enter camera groups as
name;count;resolution;Mbit/s; resolution as 4MP or 2560x1440. - Enter channel count, incoming bandwidth and decoding capacity (1080p channel equivalents) from the datasheet.
- Enter the share of cameras decoded simultaneously for live view and press Run.
Fields
- Cameras
- name;count;resolution (MP or WxH);Mbit/s
- NVR channels
- Incoming bandwidth
- 'Incoming bandwidth' in the datasheet.
- Decoding capacity
- 1080p channel equivalents (e.g. 16 × 1080p = 16).
- Simultaneous decode share
- Percentage of cameras shown on the main stream at once.
Worked example
| Input | Value |
|---|---|
| Cameras | |
| NVR channels | 64 |
| Incoming bandwidth | 320 |
| Decoding capacity | 32 |
| Simultaneous decode share | 25 |
Expected result: 44 channels (69 % of 64), 200 Mbit/s (63 % of 320); with 25 % of cameras viewed on the main stream at once 22.2 × 1080p equivalents are decoded (70 % of 32). The NVR is sufficient.
If more cameras are shown on the main stream on a video wall, decoding is the first limit reached; using sub-streams in the viewing client relieves it.
Second scenario
| Input | Value |
|---|---|
| Cameras | |
| NVR channels | 8 |
| Incoming bandwidth | 80 |
| Decoding capacity | 8 |
| Simultaneous decode share | 100 |
Expected result: 8 × 4K cameras on an 8-channel NVR: channels full, 96 Mbit/s exceeds the 80 Mbit/s limit and 8 × 4K ≈ 32 × 1080p decoding, four times the capacity of 8.
Method and assumptions
1080p equivalent = camera MP / 2.0736 (1920 × 1080). Decoding need = Σ count × equivalent × simultaneous share. Utilization above 80 % amber, above 100 % red.
Using the result and troubleshooting
If a limit is exceeded: a higher NVR model, a second NVR, sub-stream viewing or moving to H.265. Continue with the CCTV Storage Calculator for disk.
Limits and common mistakes
- Vendors define decoding differently by fps and codec (e.g. 4K@30 vs 1080p@30); H.264/H.265 differences and fast playback are not modelled.
Frequently asked questions
Is decoding capacity related to recording?
No. Recording is limited by incoming bandwidth; decoding only determines how many streams the NVR's own monitor output can show at once.
Related tools and service
- CCTV Project Capacity SummaryCombines storage, network and PoE needs of a camera project in one table.
- CCTV Bandwidth CalculatorCalculates recording (into the NVR) and viewing (out to clients) traffic separately.
Related service: NVR Recording System Installation and Management